Feleti Screw Conveyor KB
Feleti Screw Conveyor KB is designed to dewater condense process wastes containing up to 20% of dry matter.
Concentration of solid matter at an outlet is varied from 25 to 65% depending on the field of application.
The raw product is transported to the charging chute via pneumatic transport and then supplied into the conveyor auger through the cyclone collector. In the conveyor auger, the raw product is moved to the spring-closing lid through which the dewatered product is released. The case section in which the auger is installed has the two-walled clothing with a gap between the walls. The inner wall is made of a perforated steel sheet. A part of water, which is present in the raw material moved through the case with the auger, drips out through the
perforated clothing. When the raw material reaches the end of the dewatering press, it becomes pressed to the springclosing release lid. The pressure thus elevates and extracts water from the raw material. Water is drained through the pipe. When a fairly large volume of the raw material is collected and the pressure in the case begins to exceed the pneumatic cylinder pressure, the spring-closing release lid opens. A part of the product falls out and the spring-closing lid then closes remaining in this position until the pressure in the case again elevates.
- stainless steel AISI 304
- overall dimensions : 2250*1225*1200mm
- rotation speed 21 rpm
- consumed power 3 kW
- compressed air pressure 7 bar
- three-phase power supply
KOMPO North America Inc. is happy to provide its customers with longest Warranty on the market. We are happy to help our customers succeed in their business.
Please, contact us for details at [email protected] or Toll Free: 1-888-307-5330.
- Longest Warranty
- Preventive maintenance plans
- Spare parts kits
- Urgent service available