Washing module is designed to wash tools such as knives, hooks, knives sharpeners, gloves, molds and others with a washing solution of the required proportion of water and washing solution under a certain temperature rinsed through jet nozzles. Solution is warmed up by thermo-electrical elements which are located in the washing module or by steam (existing steam hook-up required). Solution goes through the system of filters and is used as many times as required.

Rinsing module is designed to rinse the washing solution off with cold water under pressure of the totes through the system of jet nozzles. If sterilization is required, an option of connecting hot water 80-85 °С to the rinsing module is available. Closed loop of water circulation: after rinsing water enters the cleaning tank of the main washing zone. Reservoir in the main washing zone overflows and excess of the detergent with surfacing dirt (fat, oil, foam) enters the sewer drain, thereby providing continuous renewal of detergent in the main reservoir. Complete renewal of water with detergent in the reservoir occurs independently during 1.5 – 3 hours.

High productivity of the machine is provided by strong mechanical impact of detergent on the boxing by means of high efficiency circulating pump. Washing area is equipped with a circulating pump, which provides a flow of detergent from the reservoir to the injectors under high pressure, in a large volume water circulation – up to 1000 liters per minute.